mimedefang: initial import

5 files changed, 202 insertions, 0 deletions

diff --git a/mimedefang/.footprint b/mimedefang/.footprint
new file mode 100644
index 000000000..3b65b65b8
--- /dev/null
+++ b/mimedefang/.footprint
@@ -0,0 +1,30 @@
+drwxr-xr-x	root/root	etc/
+drwxr-xr-x	root/root	etc/mail/
+-rw-r--r--	root/root	etc/mail/mimedefang-filter
+drwxr-xr-x	root/root	etc/rc.d/
+-rwxr-xr-x	root/root	etc/rc.d/mimedefang
+drwxr-xr-x	root/root	mail/
+-rw-r--r--	root/root	mail/mimedefang.conf
+drwxr-xr-x	root/root	usr/
+drwxr-xr-x	root/root	usr/bin/
+-rwxr-xr-x	root/root	usr/bin/md-mx-ctrl
+-rwxr-xr-x	root/root	usr/bin/mimedefang
+-rwxr-xr-x	root/root	usr/bin/mimedefang-multiplexor
+-rwxr-xr-x	root/root	usr/bin/mimedefang.pl
+-rwxr-xr-x	root/root	usr/bin/watch-mimedefang
+drwxr-xr-x	root/root	usr/man/
+drwxr-xr-x	root/root	usr/man/man5/
+-rw-r--r--	root/root	usr/man/man5/mimedefang-filter.5.gz
+drwxr-xr-x	root/root	usr/man/man7/
+-rw-r--r--	root/root	usr/man/man7/mimedefang-notify.7.gz
+-rw-r--r--	root/root	usr/man/man7/mimedefang-protocol.7.gz
+drwxr-xr-x	root/root	usr/man/man8/
+-rw-r--r--	root/root	usr/man/man8/md-mx-ctrl.8.gz
+-rw-r--r--	root/root	usr/man/man8/mimedefang-multiplexor.8.gz
+-rw-r--r--	root/root	usr/man/man8/mimedefang.8.gz
+-rw-r--r--	root/root	usr/man/man8/mimedefang.pl.8.gz
+-rw-r--r--	root/root	usr/man/man8/watch-mimedefang.8.gz
+drwxr-xr-x	root/root	var/
+drwxr-xr-x	root/root	var/spool/
+drwxr-x---	clamav/clamav	var/spool/MD-Quarantine/
+drwxr-x---	clamav/clamav	var/spool/MIMEDefang/
diff --git a/mimedefang/.md5sum b/mimedefang/.md5sum
new file mode 100644
index 000000000..6d5962a27
--- /dev/null
+++ b/mimedefang/.md5sum
@@ -0,0 +1,2 @@
+6424dd840f1a8251181bffb042e01961  mimedefang-2.58.tar.gz
+67965579efa6d5328359cea13c720f3c  mimedefang.conf
diff --git a/mimedefang/Pkgfile b/mimedefang/Pkgfile
new file mode 100644
index 000000000..ebb6852c8
--- /dev/null
+++ b/mimedefang/Pkgfile
@@ -0,0 +1,27 @@
+# Description: A mail filtering framework
+# URL: http://www.mimedefang.org
+# Maintainer: Mikhail Kolesnik, mike at openbunker dot org
+# Depends on: clamav p5-mime-tools p5-io-stringy p5-mailtools p5-digest-sha1 p5-unix-syslog
+
+name=mimedefang
+version=2.58
+release=1
+source=(http://www.mimedefang.org/static/$name-$version.tar.gz
+		mimedefang.conf)
+
+build () {
+	cd $name-$version
+	./configure --prefix=/usr \
+		    --with-user=clamav \
+		    --sysconfdir=/etc
+	make
+	make DESTDIR=$PKG install
+	sed -i \s/"\/var\/spool\/MIMEDefang\/clamd\.sock"/"\/var\/run\/clamav\/clamd\.sock"/ $PKG/usr/bin/mimedefang.pl
+	install -D -m 755 examples/init-script $PKG/etc/rc.d/mimedefang
+	install -D -m 644 $SRC/mimedefang.conf $PKG/etc/mail/mimedefang.conf
+	mkdir -p $PKG/var/spool/MIMEDefang $PKG/var/spool/MD-Quarantine
+	chown clamav:clamav $PKG/var/spool/MIMEDefang
+	chown clamav:clamav $PKG/var/spool/MD-Quarantine
+	chmod 750 $PKG/var/spool/MIMEDefang
+	chmod 750 $PKG/var/spool/MD-Quarantine
+}
diff --git a/mimedefang/README b/mimedefang/README
new file mode 100644
index 000000000..60398764a
--- /dev/null
+++ b/mimedefang/README
@@ -0,0 +1,20 @@
+README for mimedefang
+
+REQUIREMENTS
+You'll need clamav with "--enable-milter", milter capable mail transport agent (only
+sendmail is assumed in this port, for others - you should edit/move
+configuration files).
+
+PRE-INSTALL
+
+POST-INSTALL
+Edit sendmail.mc to add something like this:
+
+ INPUT_MAIL_FILTER(`mimedefang', `S=local:/var/spool/MIMEDefang/mimedefang.sock, F=T, T=C:20s;S:25s;R:25s;E:1m')dnl
+ define(`confINPUT_MAIL_FILTERS', `mimedefang')dnl
+
+RESOURCES
+HOWTO http://www.mickeyhill.com/mimedefang-howto/
+FAQ http://www.mimedefang.org/node.php?id=6
+
+PRECAUTION
diff --git a/mimedefang/mimedefang.conf b/mimedefang/mimedefang.conf
new file mode 100644
index 000000000..43daa36ee
--- /dev/null
+++ b/mimedefang/mimedefang.conf
@@ -0,0 +1,123 @@
+SPOOLDIR='/var/spool/MIMEDefang'
+
+# The socket used by mimedefang to communicate with sendmail
+SOCKET=$SPOOLDIR/mimedefang.sock
+
+# Run the multiplexor and filters as this user, not root.  RECOMMENDED
+MX_USER=clamav
+
+# Syslog facility
+SYSLOG_FACILITY=mail
+
+# If you want to keep spool directories around if the filter fails,
+# set the next one to yes
+# KEEP_FAILED_DIRECTORIES=no
+
+# "yes" turns on the multiplexor relay checking function
+# MX_RELAY_CHECK=no
+
+# "yes" turns on the multiplexor HELO checking function
+# MX_HELO_CHECK=no
+
+# "yes" turns on the multiplexor sender checking function
+# MX_SENDER_CHECK=no
+
+# "yes" turns on the multiplexor recipient checking function
+# MX_RECIPIENT_CHECK=no
+
+# Set to yes if you want the multiplexor to log events to syslog
+MX_LOG=yes
+
+# Set to yes if you want to use an embedded Perl interpreter
+# MX_EMBED_PERL=yes
+
+# Set to full path of socket for Sendmail's SOCKETMAP map, if you
+# want to use it with MIMEDefang
+# MX_MAP_SOCKET=$SPOOLDIR/map.sock
+
+# The multiplexor does not start all slaves at the same time.  Instead,
+# it starts one slave every MX_SLAVE_DELAY seconds when the system is idle.
+# (If the system is busy, the multiplexor starts slaves as incoming mail
+# requires attention.)
+# MX_SLAVE_DELAY=3
+
+# The next setting is an absolute limit on slave activation.  The multiplexor
+# will NEVER activate a slave within MX_MIN_SLAVE_DELAY seconds of another.
+# The default of zero means that the multiplexor will activate slaves as
+# quickly as necessary to keep up with incoming mail.
+# MX_MIN_SLAVE_DELAY=0
+
+# Set to yes if you want the multiplexor to log stats in
+# /var/log/mimedefang/stats  The /var/log/mimedefang directory must
+# exist and be writable by the user you're running MIMEDefang as.
+# MX_STATS=no
+
+# Number of slaves reserved for connections from loopback.  Use -1
+# for default behaviour, 0 to allow loopback connections to queue,
+# or >0 to reserve slaves for loopback connections
+LOOPBACK_RESERVED_CONNECTIONS=-1
+
+# Set to yes if you want the stats file flushed after each entry
+# MX_FLUSH_STATS=no
+
+# Set to yes if you want the multiplexor to log stats to syslog
+# MX_STATS_SYSLOG=no
+
+# The socket used by the multiplexor
+MX_SOCKET=$SPOOLDIR/mimedefang-multiplexor.sock
+
+# Maximum # of requests a process handles
+# MX_REQUESTS=200
+
+# Minimum number of processes to keep.  The default of 0 is probably
+# too low; we suggest 2 instead.
+MX_MINIMUM=4
+
+# Maximum number of processes to run (mail received while this many
+# processes are running is rejected with a temporary failure, so be
+# wary of how many emails you receive at a time).  This applies only
+# if you DO use the multiplexor.  The default value of 2 is probably
+# too low; we suggest 10 instead
+MX_MAXIMUM=10
+
+# Uncomment to log slave status; it will be logged every
+# MX_LOG_SLAVE_STATUS_INTERVAL seconds
+# MX_LOG_SLAVE_STATUS_INTERVAL=30
+
+# Uncomment next line to have busy slaves send status updates to the
+# multiplexor.  NOTE: Consumes one extra file descriptor per slave, plus
+# a bit of CPU time.
+# MX_STATUS_UPDATES=yes
+
+# Limit slave processes' resident-set size to this many kilobytes.  Default
+# is unlimited.
+# MX_MAX_RSS=10000
+
+# Limit total size of slave processes' memory space to this many kilobytes.
+# Default is unlimited.
+# MX_MAX_AS=30000
+
+# If you want to use the "notification" facility, set the appropriate port.
+# See the mimedefang-notify man page for details.
+# MX_NOTIFIER=inet:4567
+
+# Number of seconds a process should be idle before checking for
+# minimum number and killed
+# MX_IDLE=300
+
+# Number of seconds a process is allowed to scan an email before it is
+# considered dead.  The default is 30 seconds; we suggest 600.
+MX_BUSY=20
+
+# Extra sendmail macros to pass.  Actually, you can add any extra
+# mimedefang options here...
+# MD_EXTRA="-a auth_author"
+
+# Multiplexor queue size -- default is 0 (no queueing)
+# MX_QUEUE_SIZE=10
+
+# Multiplexor queue timeout -- default is 30 seconds
+# MX_QUEUE_TIMEOUT=30
+
+# SUBFILTER specifies which filter rules file to use
+SUBFILTER=/etc/mail/mimedefang-filter